Actions Starting When Machine is On

Interval			Assembly	Action	Sec.
A	B	C
50h			Pneumatics	Draining water separator	4.5.1
200h			Rotary feed table	Checking oil level in rotary feed table	4.11.1
200h			Machine frame	Removing chips from the work area	4.12.1
200h			Machine frame	Running cleaning stroke of linear axes	4.12.3
200h			Machine frame	Checking safety pane of work area safety door	4.12.10
200h			Machine frame	Checking safety pane of the workpiece setting station safety door (front door)	4.12.12
500h			Machining unit	Cleaning and checking tool holding fixture	4.8.4
1000h			Machining unit	Check tool pull-in force	4.8.5
1000h			Tool magazine	Cleaning and checking tool holders, tool cartridges and tools	4.9.1
1000h			Machine frame	Checking dirt wipers and concertina covers	4.12.2
1000h			Machine frame	Check emergency stop device	4.12.4
1000h			Measuring Probe (option)	Cleaning and checking measuring probe	4.13.1
1500h			Chip disposal	Cleaning and checking fill level sensor	4.7.1
2000h			Machine frame	Checking linear roller guides and axis drives	4.12.9
5000h			Tool magazine	Tensioning magazine chains	4.9.3
	3m		Pneumatics	Replacing the filter pressure regulator element	4.5.3
	3m		Pneumatics	Replace filter element of the compressed air filter	4.5.5
	3m		Pneumatics	Replacing filter elements of the maintenance unit for the measuring scale sealing air	4.5.7
	1a		Tool magazine	Cleaning drip pan	4.9.2
	1a		Rotary feed table	Oil change in rotary feed table	4.11.2
	1a		Machine frame	Checking completeness and condition of guard panels	4.12.6
	2a		Tool magazine	Lubricate traverse attachment and guide of the tool setting station	4.9.4
	2a		Tool magazine	Lubricate guideways of the tool change door	4.9.5
	8a		Machine frame	Replacing safety pane of work area safety door	4.12.11
	8a		Machine frame	Replacing safety pane of the workpiece setting station safety door (front door)	4.12.13
		x	Measuring probe (option)	Replacing battery	5.6.1