Adjust the cylinder switch for the indexing

Parts List Reference Files Tools Required Torque Chart
Note: Most common screw sizes shown. Always consult manufacturers recommendations.
Screw Size Grade Torque Specs Range
M5 12.9 7.7-10.3 N-m
M6 12.9 13.1-17.6 N-m
M8 12.9 32.1-42.6 N-m
M10 12.9 64-84 N-m
M12 12.9 110-146 N-m
M16 12.9 274-365 N-m
M20 12.9 534-712 N-m
M24 12.9 923-1231 N-m
Tools Required
1. Set of Metric Allen Wrenches
2. Set of Metric Open End Wrenches
3. Set of Metric Sockets
4. Ratchet and Extensions
5. Torque Wrench
6. Lift Assist Device
7. Depth Gauge
8. Lubricating Oil
9. Isopropyl Alcohol
10. Lint Free Rag
11. Fine Stone

Step 1: ECPL

Step 2: Rotate loading station in transfer position and run in with cylinder.

Step 3: Set switch. Measure switch position (dimension a)

Step 4: Rotate pallet loading station upper part by 90°.

Step 5: Move to 90° position with indexing unit.

Step 6: Set switch. Measure switch position (dimension b).

Step 7: Set switch to position X = (0.5*(a-b)/2)+b

Switch must only respond in the "Pallet transfer position". The switch must not respond in other 3x90° positions and all intermediate positions.

Check switch setting in cold/warm operation.

Step 6: ECPL